PerfectPass manufactures hundreds of Display combinations to fit and compliment almost any dash cluster. Typically the Display will replace the existing boat speedometer since the PerfectPass speedometer reading is GPS accurate. However, the tachometer can also be replaced.

The following Displays are just a sampling of our most common units that are available. Most are available with a variety of bezels to match any boat. (Stainless Steel, Black, Gold, White)

If you do not see one that matches your boat, just ask us and we can likely build one for you. Not sure what size you need, click HERE

Note: Replacement displays for existing systems purchased before 2010 will likely need to upgrade their paddle wheel systems to GPS Stargazer so the new Display is compatible. (Older paddle wheel systems used an Intel platform that was discontinued by INTEL)

(Actual Colors/Shading May Vary)

LCD - Please note the LCD's in all units are identical. Some Displays shown below are artist rendering vs. actual photographs.

3.5 inch Star Gazer Black

3.5 inch Star Gazer White

3.5 inch Silver

3.5 inch Mastercraft White

3.5 inch Mastercraft Black

3.5 inch Mastercraft Red

3.5 inch Tige Black

3.5 inch Nautique White

3.5 inch Nautique Gray (2000 - 2002)

3.5 inch Centurion Black

3.5 inch Centurion Silver

3.5 inch Moomba White

3.5 inch Tige Silver

3.5 inch Supra Silver

3.5 inch Cobalt Black

3.5 inch Sanger Black

3.5 inch Chaparral Black

3.5 inch Crownline Black

5 inch Nautiques (2003 - 2006) with Jumbo LCD

5 inch Nautiques (2007 - 2008) with Jumbo LCD

5 inch Malibu Black with Jumbo LCD

5 inch Malibu Black/Orange with Jumbo LCD (2004 - 2006)

5 inch Star Gazer White with Jumbo LCD

5 inch Star Gazer Black with Jumbo LCD

2008-2013 Chapparal (3.5 inch size only)

External Display
This display includes an adjustable mounting post for applications where an in dash is not possible. (measures 5" across)

What Size Display do I Need ?

Marine Speedometers/Tachometers are manufactured in only two industry sizes. They are commonly referred to as either 3.5 inch (Often referred to as 4 inch) or the very large 5 inch which are common on newer ski boats such as Malibu & Nautiques.

If you measure across the front of your existing speedometer or tachometer you will find the following:

* If it measures about 3.5 – 3.75 inches then you will require a 3.5 inch PerfectPass Display

* If it measures about 4.5 - 4.75 inches then you will require a 5 inch PerfectPass Display

“Older Single Line Display Gauge”

This image shows the “single line” Display Gauge that was produced from 1995 – June 2005. The 2006 model year for most boat brands was when the newer “multi Line” Display was introduced. Note that the LCD is much smaller with just one line of data. The “multi line” Displays have multiple lines of data in various font sizes.